Watercolors is Water Based Nail Enamel, free from harsh chemical odors and contains NO formaldehyde, toluene, dibutyl phthalates or FD& C colors.
The Basic Differences Between Water Based and Traditional Solvent Based Polish:
Regular polishes are solutions of nitrocellulose resins in strong chemical solvents. As the chemical solvents evaporate the Nitrocellulose forms a hard film. These harsh, bad-smelling solvents, are then also used to remove the polish (your run-of-the-mill polish remover) by dissolving the film.
By contrast, WaterColors water-based polish uses an emulsion resin in the form of particles suspended in water. As the water evaporates, the particles touch each other and form a hard, tightly knit film. This hard film is no longer soluble in water.
At first, it may seem that these systems are similar except for the base (chemical or water). But they are in fact very different. One cures by reversible chemical solvent evaporation, WaterColors by creating a tightly knit film. Chemical based polish is easily dissolved, WaterColors not so easily. PLEASE READ ON...
Storage. Store WaterColors at room temperature. Cold temperatures can thicken the polish. If it thickens, add ONE drop of WATER to the bottle and shake well. This should return the polish to normal consistency. If it does not, the polish had been too cold for too long and needs to be replaced.
-Shape your nails, clean up your cuticles and wash your hands/feet.
-If using cuticle oil make sure the oil has penetrated the nail before painting.
-Shake before using.
-2 or 3 thin coats will dry faster than 1 thick coat.
-WaterColors Clear acts as a Basecoat and a Topcoat. It looks milky but dries clear.
-You CANNOT use chemical solvent based polish, topcoat or basecoat with WaterColors - it will not work.
Dries to water-resistance in about 15 minutes. Withstands dish liquid or shampoo in about an hour (longer in cold temperatures or high humidity). About 75% of the hardness is achieved very quickly, but it needs 4-6 hours to achieve maximum hardness. The more time you give it to cure properly, the longer it will wear. For this reason you may choose to apply it at night when the day's activities are done.
-If you don't allow time for maximum curing you may get worn areas at the tips or scratches - ugh. But because WaterColors creates a thin film, these areas can be touched up to create a freshly-applied appearance.
Saturate a textured cotton pad or gauze with Non-Acetone polish remover, rubbing alcohol, or vodka/grain alcohol. Let the saturated pad sit on the nail for a few seconds then rub with gentle pressure until it is completely removed.
-If you polish over very dry nails and/or wear your polish for extended periods it will take more effort to remove - but it will come off. Do not scratch at the nail.
-Use only NON-Acetone based remover. Since it is a water-based system, WaterColors will NOT come off with acetone based remover.
Water (Aqua), Acrylates copolymer. May Contain: Iron Oxides (CI 77490), Mica (CI 77019), Titanium Dioxide (CI 77891), Ultramarine Blue (CI 77007)